Archive

Archive for December, 2011

Controls & Tire Covers

December 28th, 2011 Comments off

The controls and tires are two of the most crucial aspects of a vehicle. Keeping these wheels cleaned, polished and in great condition could keep your car or truck on the road longer. From interior steering wheels to many sizes of car and truck tires you can find appropriate covers to protect and preserve the initial materials of the controls or tires.

Steering wheels are very important since one slip can lead to a dangerous accident. With time human hands will gradually wear down the initial wheel material which may cause fading, tearing and slippery spots around the wheel which are just accidents waiting to happen. Having a genuine leather controls cover you not only protect the wheel itself from scrapes and scratches but additionally keep the hands from slipping across an old controls surface. Genuine leather steering wheel covers can be found in a large range of colors to custom match car interiors including black, blue, brown, red, green and yellow.

Tires are also in need of high quality protection to ensure you’re always riding on safe and sturdy wheels. Whether you store your vehicle inside or outside there are a number of hazards that can combine to ruin the outside of a car or truck tire including debris, moisture and mildew, rain, high winds and water. Leaving tires unprotected can lead to a gradual weakening of the tire and in time this could cause flats and blow outs so be sure your tires are saved in mint condition with heavy duty, all weather tire covers.

Made from durable and safe from nature’s elements fabrics tire covers are created to hold up against strong hazards including snow, sleet, heavy winds and intense UV light. Ideal for using indoors and outdoors covers easily slip over tires and form a snug fit to help keep moisture out while still allowing enough air to flow through so mildew doesn’t form. If you are considering parking your automobile outside for a few days putting high quality covers on all tires will ensure your tires are in working shape as you prepare to drive.

Categories: Checking tips Tags:

On the point of Drive a vehicle

December 28th, 2011 Comments off

The first thing that any motorist should do before driving a vehicle is to understand all of the automobile safety features and controls. Once you are completely familiar with your vehicle, you are prepared to start. Before pulling away inside your car, however, be sure that it is completely safe for driving. Here is a listing of points you should always check before beginning the engine:

AIl books and coats ought to be put into a corner, allowing you to have a greater amount of room readily available for driving unhampered – a security feature and a comfort feature combined.
Be certain backseat from the car is clear. If suddenly, any loose articles within the back seat could be hurled towards the front, and injury may result.
You should enter into the vehicle by the curb side whenever practicable. In some places it is an offence to open the driver’s door in any way that creates a hazard to passing vehicles. In automobiles in which this is impractical, or perhaps in awkward situations, extreme care must be taken. Always approach the driver’s-side door from the front of the car, so you cannot fail to see oncoming traffic.
AII doors ought to be locked to help prevent them from flying open in a collision, and to keep anyone from forcing their distance to your vehicle if you stay in traffic.
Check to ensure that the parking brake is onto prevent any movement of the vehicle. The apparatus selector ought to be in Park before starting.
Make sure that signal lights function properly. (The vehicle will have to be on to see if they are in working order.)
Adjust the ventilation; excessive hear may cause drowsiness, and poor ventilation may create a deadly carbon monoxide hazard.
Adjust the seat so that you can reach all foot pedals comfortably. Also ensure that you have unobstructed vision at all angles. It might be essential to use cushions to achieve this.
Adjust all mirrors so that you can tell instantly the positions of other motor vehicles on the road.
Fasten your seat belts. The vehicle should not be place in motion until all belts are fastened and adjusted.
Check the brake pedal has resistance whenever you press it. This suggests that there’s sufficient brake fluid in the brake lines and that the brakes will function properly. If the hydraulic brakes don’t function, don’t attempt to get to a garage, but have the car towed there by a tow truck.
Be alert but relaxed. You are no longer a pedestrian. You are in command of a powerful machine that may give a large number of miles of service and satisfaction, but which is also able to destroying life and property.

Getting ready to drive

Getting ready to drive is a vital event inside a young persons life. Are you emotionally ready to drive? Isn’t it time to concentrate all of your attention on driving? Would you possess the necessary safe attitude for competent, efficient driving? Are you prepared to overlook the mistakes of other drivers? When the answers to many of these questions are ‘yes’ then you’re ready to begin.

Make sure the parking brake is on.
Press the brake pedal with the right foot and hold. The automobile mustn’t move before you are ready. This task also tests the brakes for proper function, and is a great safety precaution. If the brake is in working order, you will be unable to press the pedal completely towards the floor.
Move the selector lever to Drive. This is the position for normal driving in many automobiles.
Place their hands on the controls within the “ten-and-two” position.
Always look behind you. While using mirrors is not enough: there is a “blind spot” that must be checked by overlooking your left shoulder.
Signal your intentions, to see other drivers that which you plan to do. (Even at this practice stage, you should perform everything as if you had been in regular traffic. This way, the proper techniques will quickly become second nature, and you will make the transition in the practice area towards the busy street with a minimum of difficulty.)
Remove your right foot from the brake and put it on the accelerator. Your left foot ought to be used simply to engage the parking brake and to alter the driving lights from low to high and back.
Release the parking brake.
Gently depress the accelerator. Smooth driving is the mark of the expert.
Re-check the traffic, and re-locate once the way is clear. Always re-check traffic. After you are on the highway. Look ahead and get the entire picture. Know what is behind you, to your left, to your right, and in front.
In getting ready to stop, check your blind spot, signal and then pull to along side it from the road when the way is clear.
Brake to some smooth stop. Place the gear selector in Park, turn off the ignition, and remove the important thing. Engage the parking brake, and, if leaving the vehicle, lock all doors. Leave through the curb side if possible.

Categories: Checking tips Tags:

Establishing Your vehicle Before You Move Off

December 28th, 2011 Comments off

Before you decide to trigger on busy roads as well as in traffic, you should always master the fundamental techniques of starting, moving off and stopping. You must ensure that you have full control of your car at all times and also to have this you must have:

a. A great working knowledge of all the controls in your vehicle
b. Have the ability to co-ordinate both hand and feet controls together when needed
c. A great knowledge of the highway code
d. A great degree of respect for that needs of the other motorists
e. A great basic knowledge to enable you to look at your vehicle to make certain that everything is within the correct working order and the car is protected before leaving.

Beginning to drive isn’t just a matter of starting the engine and driving off. You should first of all check that your car is safe and ready for road use. There are some everyday checks that you should get into a habit of checking before setting off:

1. Be sure that the windscreen, windows and mirrors are clean.

2. All the lights, such as the indicators are working and if not replacing the dead bulbs (it is always smart to carry spare bulbs and fuses).

3. Check that the brakes will work, never drive with fault brakes.

There are also good quality periodic checks that you should get accustomed to making; these checks are for safety and good vehicle maintenance. Check and top up if necessary:

a. Engine oil
b. Level in the radiator or the expansion tank
c. Brake fluid level
d. Battery; top-up with distilled water if required (some batteries are easy to maintain and don’t need topping up)
e. Windscreen and rear window washer bottles

You can examine your tyres and make sure that they’re legal; they must possess the correct quantity of tread depth and really should be free from dangerous cuts and defects, they ought to continually be at the correct pressure, not just for safety but for gas mileage also.

How frequently you are making these checks is determined by just how much and often you drive. Consult your vehicles owner’s manual. Should you drive more regularly, you may need to check these items every day.
Always have your vehicle serviced regularly by a professional garage, your owner’s manual should recommend just when was best for your vehicle.

After you have checked the things above, you check the following for that safety individuals and your passengers, and for other motorists.

Every time you receive to your vehicle, check that:

1. All doors are properly closed

2. Your driving seat is incorporated in the best position for you to see clearly everywhere, and reach all the controls comfortably

3. The top restraint is incorporated in the correct position

4. You and all your passengers get their seat belts on

5. Look into the parking brake again which the gear lever is within neutral (if you are within an automatic it should be within the position P or N)

6. Always check that you have enough fuel to obtain where you need to be, or that you could reach an energy station. It might sound silly, before you set off make sure you know the controls and just how they work, as well as ensure that you be aware of size of your vehicle (width, weight and height) and try to make sure you know if your vehicle is front, rear, or four-wheel drive and when you have ABS or not. This can make sure that you use the correct braking distance and handling for your car.

Categories: Checking tips Tags:

Get the Car Ready For Treacherous Winter Driving Conditions

December 28th, 2011 Comments off

The cold winter season are coming soon meaning the times can get shorter and night time can come faster. With winter comes possible snow, storms and rain which are all hazardous to driving. It’s imperative to ensure that your car is in excellent condition before the temperature gets even cooler and also the sky turns even darker. Preparing properly and keeping your vehicle who is fit can prevent you from being stranded in the cold weather.

Some people will even be driving to operate at nighttime because of the seasonal change. Currently is the greatest time for you to ensure that your headlights and brake lighting is functional. There are two easy methods for accomplishing this goal. The first strategy is with the help of another person, for example an acquaintance or perhaps a friend. Stay seated in the car and have your friend stand in out in front. Turn on your headlights and have your friend or spotter check if the lights are activating and off as it should. Next turn on your high beams and see if that is working correctly. Then switch on both of your turn signals. Perhaps you have buddy let you know if there is anything that unusual or otherwise functioning.

Turn on the headlights again while your friend is standing for the back of your vehicle. The lights at the rear of your vehicle, the tail lights, should work. Apply pressure for your brakes. The brake lights should seriously. Repeat the test for your turn signals. Finally together with your parking brake on, shift the gear to reverse and make sure overturn lights come on.

When there is nobody available to advise you regarding this, you can conduct the tests yourself by parking your car inside a garage or near a wall. It is simple to test the leading first and then reverse your automobile to look into the lights on the back.

It is crucial that the wiper blades will work. Purchase brand new ones if you will find any signs and symptoms of deterioration or peeling and cracking. Lift the hood and check your wiper fluid to make sure there is enough left. Then switch on your wipers and be sure that it cleans your windshield completely. A dirty windshield is hazardous because it obstructs your view and may prevent you from seeing other cars and pedestrians.

Make sure the fluid of your radiator is level as well as brake and power steering fluids to ensure there’s a sufficient amount. Be on the lookout for any tubes which appear worn-out and cracked or leaks and produce these to the interest of the professional mechanic or the dealership. If you’re a do-it-yourself mechanic you probably look after your car on a regular basis. It’s an excellent idea to use daylight savings time like a yearly reminder to make sure the vehicle is protected and functioning properly, no matter if it’s summer or winter.

Be sure to look at your spare tire for cracks, peeling and ensure it’s not too old. Makes it filled up properly and also the air pressure is what it should be. You need to have a jack that is working correctly which all the parts can be found. In the event of emergency you need to have a kit ready with important items on hand. Important what to include make the perfect flashlight, jumper cables, road flares or perhaps a safety triangle along with a blanket. Don’t forget the batteries for the flashlight. The blanket serves two purposes. One if you’re stranded you are able to stay warm and 2 if you need to change a flat and you’re simply wearing nice clothes, you can lay the blanket down to keep the clothes looking great as new.

Categories: Checking tips Tags: